Search
8 results for "epoxy"
Products · 1
Insights · 7
Corrosion-Resistant Rebar — Epoxy (A775) vs Galvanized (A767) vs Stainless (A955): Choosing for Budget and Service Life
Comparing three corrosion-resistant rebar systems: epoxy-coated (ASTM A775/A934), hot-dip galvanized (A767), and stainless (A955) — protection mechanism, chloride threshold, cost relative to black bar, installation cautions, and a decision tree to choose by exposure + design life for Thai coastal projects.
Industrial Floor Coating: Epoxy vs PU vs PU-Cement vs Acrylic (MMA) — Choosing a System per EN 13813 in Thailand
Comparing 4 industrial floor coating systems: epoxy, polyurethane (PU), PU-cement (urethane concrete), and acrylic/MMA (fast-cure) — chemical, abrasion, and thermal-shock resistance, the EN 13813 standard, and how to choose for food/beverage/chemical/cold-room/fast-turnaround plants in Thailand.
Tank Lining — Chemical-Resistant Internal Coatings: Epoxy Novolac vs Vinyl Ester per API 652 / NACE
A guide to chemical-resistant tank linings: epoxy, epoxy novolac (98% acid), vinyl ester (acids/alkalis/solvents, high temperature), immersion surface prep, holiday testing, and standards API 652 / NACE SP0178 / SP0188 — selecting by chemical and temperature for work in Thailand.
Marine Coating Im2 — Choosing epoxy mastic vs chlorinated rubber vs coal tar for Thai offshore work
Compare marine coatings for ship hull, dock, offshore structure in the splash zone — ISO 12944 Im2 specification, DFT, salt spray performance + Thai DIW environmental rules
Rust Converter vs Sandblast + Epoxy Primer — 5-Year TCO and How to Choose per SSPC
Comparing two approaches to managing structural steel rust in Thailand — 5-year total cost of ownership, job speed, SSPC-SP / ISO 12944 standards, and the conditions that determine the right choice
ISO 12944 Protective Paint Systems for Steel — Selecting Corrosivity C2–CX, Durability, and Primer/Intermediate/Topcoat for Thailand
How to select a protective coating system for steel structures per ISO 12944: corrosivity categories C1–C5/CX (2017/2018 revision), durability ranges L/M/H/VH, matching zinc-rich primer + epoxy MIO + PU topcoat systems to dry film thickness (DFT) per category, mapping to Thai environments (urban plants vs coastal Map Ta Phut/Laem Chabang), and the spec mistakes TOR writers make most.
Paint + Coating for Stainless Steel in Food / Pharma Plants — FDA 21 CFR + ISO 22196 + TIS spec
Choosing paint and specialty coating for stainless steel structures in food and pharmaceutical plants per FDA 21 CFR 175.300, ISO 22196 antimicrobial, TIS (มอก.), and HACCP / GMP — comparing epoxy phenolic, food-grade polyurethane, acrylic-silicate antimicrobial concrete sealer