Steel frame and pipes by the sea painted with SGP-001 beside an unpainted rusted frame
Industrial coatings · SG series + NOVA · 10 products

Industrial coatings
Chosen by the job · prices on the page · nationwide delivery

Anti-rust paint for steel · wet and underwater coatings · heat-reflective roof paint · solar panel anti-dust coating · glow-in-the-dark paint · antimicrobial concrete sealer. Standard SG series and budget NOVA line side by side.

Salt-spray tested
SGP-001 and SGU-201: ASTM B117 2,000 h, no rust
Less surface prep
Several coatings need no blasting · some go on wet or underwater surfaces
Prices on the page
Standard SG series and budget NOVA line side by side

Which industrial coatings do you sell, and how much are they?

10 coatings, chosen by the job: anti-rust paint SGP-001, which goes over tight surface rust without blasting (฿8,100 per 1 US Gallon); SGU-201 epoxy for wet or submerged steel (from ฿2,560 per Size S (A 1kg + B 0.2kg)); heat-reflective NOVA Cool (฿580 per 1 ลิตร); SGL-301 glow paint (฿2,340 per ขนาด 1 kg); plus budget NOVA versions, a solar panel anti-dust coating and an antimicrobial concrete sealer. Prices are unit price, excluding 7% VAT; nationwide delivery. The full list with prices is in the table below.

What customers run into

Each one has a solution we have already proven on real Thai plant

Blasting the whole structure before repainting
SGP-001 goes over tight surface rust and sound old paint after hand cleaning
The steel is under water and the plant cannot stop
SGU-201 cures on wet and submerged surfaces, VOC 0
A hot factory roof and a high air-conditioning bill
NOVA Cool lowers the roof surface temperature by about 5–10°C
Escape routes go dark when the power fails
SGL-301 glows 8–12 h after charging, no power needed

How we work

1
Message us on LINE

Tell us the job, the area and send a photo of the surface.

2
Coating and quantity

We recommend the coating and calculate the quantity for the area.

3
Quotation

Price per unit as listed, with delivery to your province.

4
Delivery

Nationwide delivery with a tax invoice.

Request a coating quotation

Tell us the job, the area (m²) and the surface — we recommend the coating, calculate the quantity and send a price.

We call back during business hours (08:00–17:00 ICT)
Which choice pays off?

Comparison tables — specs, price and a recommendation

Ran the numbers but still undecided? These go deeper — full specs, the standards, and what it looks like in service.

Every coating we sell — what it is for, and the price (unit price, excluding 7% VAT)

Technical detail and standards — for engineers and inspectors to confirm the selection

ProductBest forPrice from
One-Part Moisture-Curing Polyurethane SGP-001Structural steel, tanks and pipes — one system, primer to topcoat฿510 per 1 US Cup
High-Performance Anti-Rust Coating — Rust ShieldLarge-area anti-rust work on a tight budget — general steelwork฿340 per 1 US Cup
Two-Part Solvent-Free Epoxy SGU-201 (Wet/Underwater)Submerged piles, pipes and risers · splash zone · repairs where the water cannot be stopped฿2,560 per Size S (A 1kg + B 0.2kg)
Wet & Underwater Protective Coating — Aqua ShieldLarge-volume wet or underwater work on a project budget฿1,000 per Set S (A 1.0kg + B 0.2kg)
Heat-Reflective Cooling Paint — CoolFactory and warehouse roofs · sun-facing walls · lower air-conditioning load฿580 per 1 ลิตร
Solar Panel Anti-Dust Coating — Solar Coat Formula 2Solar farms · factory rooftop solar · dusty sites฿1,600 per 1 ลิตร
Glow-in-the-Dark Coating SGL-301 (Yellow-Green)Escape routes · walkways and car parks · safety markings฿2,340 per ขนาด 1 kg
Glow-in-the-Dark Coating SGL-301 (Blue-Green)Escape routes · walkways and car parks · safety markings฿2,340 per ขนาด 1 kg
Antimicrobial Concrete Sealer (Milk White)Concrete floors and walls in food and pharma plants and hygiene areasprice on request
Antimicrobial Concrete Sealer (White)Concrete floors and walls in food and pharma plants and hygiene areasprice on request

Frequently asked questions

Which coatings do you sell?

10 products: One-Part Moisture-Curing Polyurethane SGP-001 · High-Performance Anti-Rust Coating — Rust Shield · Two-Part Solvent-Free Epoxy SGU-201 (Wet/Underwater) · Wet & Underwater Protective Coating — Aqua Shield · Heat-Reflective Cooling Paint — Cool · Solar Panel Anti-Dust Coating — Solar Coat Formula 2 · Glow-in-the-Dark Coating SGL-301 (Yellow-Green) · Glow-in-the-Dark Coating SGL-301 (Blue-Green) · Antimicrobial Concrete Sealer (Milk White) · Antimicrobial Concrete Sealer (White).

Can I paint over rust?

With SGP-001, yes: remove flaking or powdery rust and paint that no longer adheres, then coat over the tight surface rust — no blasting, except on new steel.

Is there a coating for wet or underwater steel?

SGU-201 two-part solvent-free epoxy goes on dry, damp or submerged surfaces with no primer — from ฿2,560 per Size S (A 1kg + B 0.2kg). Budget option: NOVA Aqua Shield.

Are the prices on the page final?

Listed prices are unit price, excluding 7% VAT. Delivery is quoted by province; larger quantities are quoted on request.

How much paint do I need?

Send the area in m² and a photo of the surface on LINE — we calculate the quantity with the quote.

Related insights

paint10 min

Holiday / Pinhole Detection in Coatings — Wet Sponge vs High-Voltage Spark per NACE/AMPP SP0188 & ASTM D5162

A guide to detecting holidays/pinholes (invisible discontinuities) in protective coating films: choosing low-voltage wet sponge (thin film < 500 µm) vs high-voltage spark/DC (thick film > 500 µm) per NACE/AMPP SP0188, SP0490 and ASTM D5162 — setting voltage by DFT (too low misses holidays, too high burns the film), which work requires it (tanks/pipes/immersion/marine), mark-repair-retest, and what a TOR must specify.

Read more
paint11 min

Coating Inspectors: NACE/AMPP CIP vs FROSIO — Who Needs Certification, Levels 1/2/3, and TOR Requirements

A comparison of the two main coating-inspector certification schemes: NACE/AMPP CIP (Coating Inspector Program — Levels 1/2/3, after NACE merged into AMPP in 2021) vs FROSIO (the Norwegian scheme — competence levels I/II/III) — what each level can do, which projects need which level, recognition in Thailand and abroad, and what a TOR must specify (level, independence, hold points, reporting) so coating work can actually be accepted.

Read more
paint10 min

Coating Application Conditions — The 'Surface ≥ Dew Point + 3°C' Rule, RH < 85% per ISO 8502-4 & ISO 12944-7

A guide to environmental conditions during protective-coating application: steel surface must be at least 3°C above the dew point, relative humidity RH < 85% (per the TDS), surface temperature within the product's range — how to measure the 4 readings (air temp, RH, dew point, surface temp) per ISO 8502-4 and ISO 12944-7, why painting in humid/near-dew-point conditions causes peeling/blistering/flash rust, and what a TOR must specify for Thailand's humid climate.

Read more

Send the job, the area and a photo on LINE — we reply with the coating and a price

Nationwide delivery · tax invoice

Call +66-2-096-2118